Gear reducer is generally used for the transmission equipment with low speed and large torque. The ordinary motor reducer will have several pairs of gears of the same principle to achieve the ideal deceleration effect. The ratio of the number of teeth of the big and small gears is the transmission ratio. With the continuous development of the reducer industry, more and more enterprises use gear reducer.

The characteristics of gear reducer are summarized as follows

1. R series coaxial helical gear reducer is made in combination with international technical requirements, with high scientific and technological content

2. Space saving, reliable and economical, high overload capacity, power up to 132kw;

3. Low energy consumption, superior performance, reducer efficiency as high as 95% above;

4. Small vibration, low noise, high energy saving;

5. High quality forged steel material, steel cast iron box, gear surface after high frequency heat treatment;

6. After precision machining, to ensure the parallelism of the shaft and the requirements of the positioning bearing, the reducer of the helical gear transmission assembly is equipped with various types of motors, and the combination of mechanical and electrical integration completely guarantees the quality characteristics of the product.

Scope of application

Reducer:

1. High speed shaft rotation shall not be more than 1500 rpm.

2. The peripheral speed of gear transmission shall not be greater than 20 m / s.

3. The working environment temperature is - 40-45 ℃. If it is lower than 0 ℃, the lubricating oil shall be preheated to above 0 ℃ before starting.

4. The gear reducer can be used to operate in both positive and negative directions.

The machine features of the gear reducer produced by Yongkun:

1. The gear is made of high-strength low-carbon alloy steel by carburizing and quenching. The hardness of the tooth surface is up to HRC58-62. The gears are all made of CNC grinding technology, with high precision and good touch.

2. High transmission rate: single stage is greater than 96.5%, double stage is greater than 93%, and three stage is greater than 90%.

3. Stable operation and low noise.

4. Small volume, light weight, long service life and high bearing capacity.

5. Easy to disassemble and check, easy to install